• This topic has 10 replies, 1 voice, and was last updated 7 years, 9 months ago by .

Traktor Pro 3.1

Mar 28, 2011  2) Open Traktor and choose Jack Router as your soundcard, and make sure your output routing is in “External Mode.” All of the output routing should already be confifgured correctly. 3) Open Ableton Live and open the session you made for using with Traktor. May 01, 2013  CLOSED CDJ 350 with Traktor Pro 2.5, sounds come out through 1 speaker. So I've connected the cdj's through usb with traktor pro 2.5 on pc and it all worked fine except for a few things: -Once the output routing was done, i went to test it all out and the Play button wasnt working for either deck, and the volume adjust was only working for. Home › Forums › DJing Software › No sound at all coming out of Traktor pro 2 This topic contains 10 replies, has 1 voice, and was last updated by Phil Morse 7 years, 9 months ago. Viewing 11 posts - 1 through 11 (of 11 total) Author Posts June 6, 2012 at 6:42 pm Continued.

• I have traktor pro 2 installed and my hercules e2 controller works fine with it, all controls are fine but no sounds played through traktor play.
  Under Audio setup i have the following settings:
  Audio device: ASIO4ALL v2
  Sample rate: 24000Hz
  Latency: 512

  Then under the ‘Built in soundcard’ bit i have ASIO4ALL selected again. The only other choice being something called” Conexant 20561 smartaudio ( (Wassapi) (Shared mode))”

  I have no idea what to do with input & output routing, but have had no luck with just guessing. could really use some help people. if you need any more info, let me know. thanks

  On Audio Setup, select “ASIO4ALL” for audio device. Then, on Output Routing, select “Internal” for mixing mode, on Out Master select 1: Front Left, then 2: Front Right. Output Monitor should be 3: Back Left, then 4: Back Right.

  Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man

  So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers./non-veg-cooking-recipes-in-hindi-free-download.html.

  Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.

  If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/ /zebra-2-vst-plugin-download.html.

  Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man

  So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.

  Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.

  If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/

  Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man

  So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.

  Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.

  If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/

  3D 5.1 soundcards will work as long as you have two separate outputs. But, if you want to connect it to high-powered mixers and speakers, then I recommend buying a DJ soundcard from numark or native instruments. That way there would be no distortion if you pump up the volume.

• Posts

Traktor Scratch Pro 2

Feb 17, 2012  How to setup audio in tracktor with simple speakers. This feature is not available right now. Please try again later. Numark Mixtrack Pro II - Setup With Traktor Pro 2 Traktor Pro 2 users will be happy to know that setting up the Numark Mixtrack Pro II with your preferred software is a breeze. This guide walks through the simple setup process of implementing a custom mapping file built for the Mixtrack Pro II, and selecting the appropriate audio preferences. Jul 19, 2018  Traktor Pro - Course 1 - Output Routing (video #5) Traktor Pro - Course 1 - Output Routing (video #5) Skip navigation Sign in. This video is unavailable.

Traktor Pro 2 Output Routing Not Connected

• The forum ‘DJing Software’ is closed to new topics and replies.

Traktor Pro 3 Torrent Mac